Sealed Macerator Self-Priming Pump 12V

Overview

Self-Priming Macerator Pump with Run-Dry Protection

The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation

It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.

Fish Box and Livewell Tank Evacuation

The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.

• Impeller: Jabsco Nitrile compound Macerator: Stainless Steel Cutter reduces particle size to 1/8" maximum. New 4 blade design Seal: Lip Type
• Inlet Size: 1-1/2"
• Outlet Size: 1"
• Volts: 12v
• Type: Waste Pumps

Specifications